As it is known, there is a need for large-volume meeting spaces in places such as hotels, hospitals, universities, cultural centres, wedding halls, theatre halls, opera houses and company headquarters where people come together for various activities.
Considering the future needs in these buildings with high investment costs, general meeting areas are designed and put into service with names such as conference hall, meeting hall, theatre, opera, wedding hall.
When designing these halls, acoustic calculation should be made in order to distribute the sound evenly to every point of the area with wall partition panels and movable partition wall systems in cases where the sound should not be scattered such as speeches, concerts accompanied by various instruments or singing.
When the acoustic calculation of a conference hall is made, it is possible to hear the sound on the stage from all parts of the hall.
Since the halls are designed for general needs, when there are different activities at the same time, they are divided within the general acoustic values and made suitable to respond to smaller and different divisions.
The materials we use to temporarily provide these divisions and to transform the hall back to its former state when the event is over are called movable partition walls.
Movable partition walls and partition systems are panels consisting of various materials (rock wool, wooden partition, sound insulation felts, cork panels, wall partition systems, stainless steel sheet) that absorb sound and prevent its transmission by making acoustic calculation, where materials that provide sound insulation are roughly lined in an aluminium profile frame carcass, and the outside is covered with protective materials such as chipboard, MDFlam. These panels are placed side by side and a temporary fixed wall is obtained.
If we need to examine it technically, it is a system based on a rail on which the panels move in succession and are fixed by hanging on the steel construction. It is aimed to move the panels between the two walls and on the rail and to fix them to the ground and each other with the up and down movement of the slides.
In order to provide sound insulation; partition wall systems, intermediate partition systems and wall partition panels on the upper and lower sides of the wall partition panels up and down by pressing the records moving up and down on the floor and the rail on which it is hung, creating a sound barrier and locking the last panel, the wall that provides fixed sound insulation is obtained.
The width of the panels varies between 80-110 cm. The height can vary between 2.4 and 12 m. The maximum panel height that our company has manufactured so far is 9.45 meters. Our movable partitions have been preferred in more than 100 hotels, hospitals, conference halls and wedding halls in our country.
To give an example for better understanding; movable partitions can be used on the floor under a 25 m wide space cage ceiling, as well as in projects that can become 8-10 sections in an area of 1000 m2 and each of them turns into classrooms where lessons are given, and when desired, all panels can be collected in parking lots and the area turns into a conference hall.
The exterior surfaces of movable partition walls and wall partition systems are shaped according to the demands of the architects who realize the designs. Some panels are covered with embroidered slatted surfaces manufactured by furniture manufacturers, as well as projects with decorative surfaces using mirror and stainless steel sheet materials, and the design decision is made by the architect who makes the project.
Movable partition walls and wooden partitions are generally manufactured in the range of 45 to 57 dB. For each dB, a separate layer of interior material is needed, and the selection of these materials is determined according to the acoustic calculation to be made.